This is Local 213's Work Information for Thursday, August 29th.
It is with deep sadness we announce local member Donald Jones passed away on Friday, August 23rd. Arrangements are under the care of Passage Funeral Co-operative and Cremation Centre, 3754 Route 134, Shediac Bridge N.B. Visitations will be held on Friday, September 6th, 2024, at Ste-Therese d'Avila RC Church in Cap-Pele from 6:00pm until 8:00pm, and on Saturday, September 7th, 2024, from 9:00am until time of service. A funeral service will be held in the church at 11:00am.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
Any members that would like Pre-Clearance for Point Lepreau, please contact the hall.
The Labour Day Parade will take place on Monday, September 2nd. We will be meeting at the corner of Charlotte and Broad Street by 11:00am. The parade will end at Area 506 before 12:00pm. There will be a free BBQ to follow at Rockwood Park starting at 12:30pm, between the A-Frame and and the playground. They will have bouncy castles for the kids, so bring your family. Everyone is welcome to participate. Please advise the hall if your available to volunteer.
1st call is for Lorneville at Irving Pulp & Paper Mill St West; they require:
Starting Tuesday, September 3rd Days, at 7:00am. Duration is 1 month plus and they are working 4x10's Mon-Thurs. This work is under the Industrial Agreement.
2nd call is for Lorneville at Irving Oil Refinery (TA Scope); they require:
*7 Journeyman Pipefitters (Day shift) *7 Journeyman Pipefitters (Night shift) *3 F3/F4 Welders to test on F3/F4 & Alloy 20 for some (Day shift) *5 F3/F4 Welders to test on F3/F4 & Alloy 20 for some (Night shift) *2 Apprentice Pipefitters (Day shift) *1 Apprentice Pipefitter (Night shift)
Starting Friday, September 20th 7:30am for Days and 7:30pm for Nights. Duration is 8 days and they are working 6x10's. This work is under the Short Term NMA agreement.
3rd call is for Cam at Irving Oil Refinery; they require:
Starting day shift 7:30am and night shift 7:30pm. Duration is unknown. Will be working 10 hours shifts, 40 hours plus; until the TA then switching to 60 hours. This work is under the GPMA Agreement. A D&A test is required.
4th call is for Sunny Corner at Irving Pulp & Paper; they require:
*2 Journeyman Pipefitters *2 F3/F4 Welders to test on F3/F4 and Stainless Tig
Starting Tuesday, September 3rd at 7:30am. Duration is 4 weeks plus. Will be working 10 hours shifts, 40 hours Mon-Thurs. This work is under the Industrial Agreement.
All above calls Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
Any local members interested in these calls, please contact the hall Friday morning between 8 and 10 a.m.
This is Local 213's Work Information for Wednesday, August 28th.
It is with deep sadness we announce local member Donald Jones passed away. We will provide further details once they become available.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
Any members that would like Pre-Clearance for Point Lepreau, please contact the hall.
The Labour Day Parade will take place on Monday, September 2nd. We will be meeting at the corner of Charlotte and Broad Street by 11:00am. The parade will end at Area 506 before 12:00pm. There will be a free BBQ to follow at Rockwood Park starting at 12:30pm, between the A-Frame and and the playground. They will have bouncy castles for the kids, so bring your family. Everyone is welcome to participate. Please advise the hall if your available to volunteer.
1st call is for Lorneville at Irving Pulp & Paper Mill St West; they require:
Starting Tuesday, September 3rd Days, at 7:00am. Duration is 1 month plus and they are working 4x10's Mon-Thurs. This work is under the Industrial Agreement.
2nd call is for Lorneville at Irving Oil Refinery (TA Scope); they require:
*8 Journeyman Pipefitters (Day shift) *7 Journeyman Pipefitters (Night shift) *3 F3/F4 Welders to test on F3/F4 & Alloy 20 for some (Day shift) *5 F3/F4 Welders to test on F3/F4 & Alloy 20 for some (Night shift) *2 Apprentice Pipefitters (Day shift) *1 Apprentice Pipefitter (Night shift) *1 Apprentice Welder (Day shift) & *1 Apprentice Welder (Night shift)
Starting Friday, September 20th 7:30am for Days and 7:30pm for Nights. Duration is 8 days and they are working 6x10's. This work is under the Short Term NMA agreement.
All above calls Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
Any local members interested in these calls, please contact the hall Thursday morning between 8 and 10 a.m.
This is Local 213's Work Information for Tuesday, August 27th.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
Any members that would like Pre-Clearance for Point Lepreau, please contact the hall.
The Labour Day Parade will take place on Monday, September 2nd. We will be meeting at the corner of Charlotte and Broad Street by 11:00am. The parade will end at Area 506 before 12:00pm. There will be a free BBQ to follow at Rockwood Park starting at 12:30pm, between the A-Frame and and the playground. They will have bouncy castles for the kids, so bring your family. Everyone is welcome to participate. Please advise the hall if your available to volunteer.
1st call is for Cam at Irving Oil Refinery; they require:
*1 Journeyman Instrument Tech
Starting Wednesday Sept. 9th Nights, at 7:30pm. Duration is unknown. Will be working 10 hours shifts, 40 hours plus; until the TA then switching to 60 hours. This work is under the GPMA Agreement. A D&A test is required.
2nd call is for Lorneville at Irving Tissue; they require:
* 2 Journeyman Pipefitters * 1 F3/F4 Welder to test on Carbon and Stainless
Starting Tuesday Sept. 3rd Days, at 7:00am Duration is 1 Month Plus. Will be and they are working 4x10's Mon- Thurs, 7:00-5:00 . This work is under the Industrial Agreement.
3rd call is for Babcock & Wilcox at Irving Pulp & Paper (ETP Site); they require:
*1 Journeyman Pipefitter *1 F3/F4 Welder to test on F3/F4 Carbon and Stainless Steel Tig
Starting Tuesday, September 3rd Days, at 7:30am. Duration is 2 weeks plus and they are working 4x10's Mon-Thurs. This work is under the Industrial Agreement.
4th call is for Sunny Corner at Irving Oil Refinery; they require:
*1 Journeyman Pipefitter
Starting Saturday, September 14th Days, at 7:00am. Duration is approximately 4 weeks and they are working 4x10's until outage, moving to 60hrs per week. This work is under the NMA. A D&A test is required.
5th call is for Sunny Corner at Irving Oil Refinery; they require:
*1 Journeyman Pipefitter
Starting Saturday, September 14th Nights, at 7:00pm. Duration is approximately 4 weeks and they are working 4x10's until outage moving to 60hrs per week. This work is under the NMA. A D&A test is required.
6th call is for Sunny Corner at Irving Oil Refinery; they require:
*4 Journeyman Pipefitters
Starting Wednesday, September 18th Days, at 7:00am. Duration is approximately 4 weeks and they are working 4x10's until outage moving to 60hrs per week. This work is under the NMA. A D&A test is required.
7th call is for Sunny Corner at Irving Oil Refinery; they require:
Starting Wednesday, September 18th Nights, at 7:00pm. Duration is approximately 8 weeks and they are working 4x10's until outage moving to 60hrs per week. This work is under the NMA. A D&A test is required.
8th call is for Lorneville at Irving Pulp & Paper Mill St West; they require:
*1 Apprentice Welder
Starting Tuesday, September 3rd Days, at 7:00am. Duration is 1 month plus and they are working 4x10's Mon-Thurs. This work is under the Industrial Agreement.
9th call is for Lorneville at Irving Pulp & Paper Mill St West; they require:
*1 Apprentice Pipefitter *4 Journeyman Pipefitters & *1 F3/F4 Welder to test on Carbon and Duplex
Starting Tuesday, September 3rd Days, at 7:00am. Duration is 1 month plus and they are working 4x10's Mon-Thurs. This work is under the Industrial Agreement.
All above Sunny Corner calls physical demands will include: Lifting, climbing, stairs, working at heights and working while wearing respiratory protection/under fresh air.
All above calls Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
Any local members interested in these calls, please contact the hall Wednesday morning between 8 and 10 a.m.
This is Local 213's Work Information for Monday, August 26th.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
Any members that would like Pre-Clearance for Point Lepreau, please contact the hall.
The Labour Day Parade will take place on Monday, September 2nd. We will be meeting at the corner of Charlotte and Broad Street by 11:00am. The parade will end at Area 506 before 12:00pm. There will be a free BBQ to follow at Rockwood Park starting at 12:30pm, between the A-Frame and and the playground. They will have bouncy castles for the kids, so bring your family. Everyone is welcome to participate. Please advise the hall if your available to volunteer.
1st call is for Sunny Corner at Pt. Lepreau; they require:
* 7 Instrument Tech Journeyman
Starting as soon as CSIS is cleared at 7:30am. Duration is 6 months plus, and they are working 5x8's , 7:30am -3:30pm Monday-Friday. This work is under the NMA Agreement.
2nd call is for Lorneville at Fab Shop Whitebone Way; they require:
* 1 Journeyman Pipefitters
Starting Monday Aug. 26th, at 7:30am Duration is 4 Weeks. Will be and they are working 7:30-4:00 Mon-Fri, with possible overtime and possible night shift . This work is under the Fab Shop Agreement.
3rd call is for Cam at Irving Oil Refinery; they require:
*5 Journeyman Pipefitter *2 Pipefitter Apprentice * 1 Welders to test on F3/F4;F6/F5 * 1 Welders to test on F3/F4;F6/F4
*1 Welder to test on F3/F4
Starting Wednesday Sept. 18th Days, at 7:30am. Duration is unknown. Will be working 10 hours shifts, 40 hours plus; until the TA then switching to 60 hours. This work is under the GPMA Agreement. A D&A test is required.
4th call is for Cam at Irving Oil Refinery; they require:
*7 Journeyman Pipefitters *4 Pipefitter Apprentices * 1 Welders to test on F3/F4;F6/F5 *2 Welders to test on F3/F4;F6/F4 * 2 Welders to test on F3/F4 Inconel * 4 Welders to test on F3/F4.
Starting Wednesday Sept. 18th Nights, at 7:30pm. Duration is unknown. Will be working 10 hours shifts, 40 hours plus; until the TA then switching to 60 hours. This work is under the GPMA Agreement. A D&A test is required.
5th call is for Cam at Irving Oil Refinery; they require:
*13 Journeyman Pipefitter *5 Pipefitter Apprentice * 1 Welders to test on F3/F4;F6/F4 * 2 Welders to test on F3/F4 Inconel *1 Welder to test on F3/F4.
Starting Wednesday Sept. 20th Days, at 7:30am. Duration is unknown. Will be working 10 hours shifts, 40 hours plus; until the TA then switching to 60 hours. This work is under the GPMA Agreement. . A D&A test is required.
6th call is for Cam at Irving Oil Refinery; they require:
*13 Journeyman Pipefitters *5 Pipefitter Apprentices * 1 Welders to test on F3/F4;F6/F5 *1 Welders to test on F3/F4;F6/F4 * 2 Welders to test on F3/F4 Inconel
Starting Wednesday Sept. 20th Nights, at 7:30pm. Duration is unknown. Will be working 10 hours shifts, 40 hours plus; until the TA then switching to 60 hours. This work is under the GPMA Agreement. A D&A test is required.
7th call is for Cam at Irving Oil Refinery; they require:
*2 Journeyman Instrument Techs
Starting Wednesday Sept. 11th Days, at 7:30am. Duration is unknown. Will be working 10 hours shifts, 40 hours plus; until the TA then switching to 60 hours. This work is under the GPMA Agreement. A D&A test is required.
8th call is for Cam at Irving Oil Refinery; they require:
*2 Instrument Tech Apprentices
Starting Wednesday Sept. 11th Nights, at 7:30pm. Duration is unknown. Will be working 10 hours shifts, 40 hours plus; until the TA then switching to 60 hours. This work is under the GPMA Agreement. A D&A test is required.
9th call is for Cam at Irving Oil Refinery; they require:
*1 Journeyman Instrument Tech
Starting Friday Sept. 13th DAYS, at 7:30am. Duration is unknown. Will be working 10 hours shifts, 40 hours plus; until the TA then switching to 60 hours. This work is under the GPMA Agreement. A D&A test is required.
10th call is for Cam at Irving Oil Refinery; they require:
*1 Instrument Tech Apprentices
Starting Friday Sept. 13th Nights, at 7:30pm. Duration is unknown. Will be working 10 hours shifts, 40 hours plus; until the TA then switching to 60 hours. This work is under the GPMA Agreement.. A D&A test is required.
11th call is for Lorneville at Irving Tissue; they require:
* 2 Journeyman Pipefitters * 1 F3/F4 Welder to test on Carbon and Stainless
Starting Tuesday Sept. 3rd Days, at 7:00am Duration is 1 Month Plus. Will be and they are working 4x10's Mon- Thurs, 7:00-5:00 . This work is under the Industrial Agreement.
All above calls Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
Any local members interested in these calls, please contact the hall Tuesday morning between 8 and 10 a.m.
This is Local 213's Work Information for Friday, August 23rd.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
Any members that would like Pre-Clearance for Point Lepreau, please contact the hall.
The Labour Day Parade will take place on Monday, September 2nd. We will be meeting at the corner of Charlotte and Broad Street by 11:00am. The parade will end at Area 506 before 12:00pm. There will be a free BBQ to follow at Rockwood Park starting at 12:30pm, between the A-Frame and and the playground. They will have bouncy castles for the kids, so bring your family. Everyone is welcome to participate. Please advise the hall if your available to volunteer.
1st call is for Sunny Corner at Pt. Lepreau; they require:
* 7 Instrument Tech Journeyman
Starting as soon as CSIS is cleared at 7:30am. Duration is 6 months plus, and they are working 5x8's , 7:30am -3:30pm Monday-Friday. This work is under the NMA Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
2nd call is for Lorneville at Fab Shop Whitebone Way; they require:
* 2 Journeyman Pipefitters
Starting Monday Aug. 26th, at 7:30am Duration is 4 Weeks. Will be and they are working 7:30-4:00 Mon-Fri, with possible overtime and possible night shift . This work is under the Fab Shop Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
3rd call is for Sunny Corner at IOL Refinery; they require:
Starting Monday Sept. 9th Nights, at 7:00pm. Duration is approx 4 weeks Will be working 10 hours shifts, 40 hours; until the outage then switching to 60 hours. This work is under the NMA Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
4th call is for Cam at Irving Oil Refinery; they require:
*1 Journeyman Pipefitter
Starting Wednesday Sept. 11th Nights, at 7:30pm. Duration is unknown. Will be working 10 hours shifts, 40 hours plus; until the TA then switching to 60 hours. This work is under the GPMA Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
5th call is for Cam at Irving Oil Refinery; they require:
*6 Journeyman Pipefitter *3 Pipefitter Apprentice * 2 Welders to test on F3/F4;F6/F5 * 2 Welders to test on F3/F4;F6/F4
*1 Welder to test on F3/F4
Starting Wednesday Sept. 18th Days, at 7:30am. Duration is unknown. Will be working 10 hours shifts, 40 hours plus; until the TA then switching to 60 hours. This work is under the GPMA Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
6th call is for Cam at Irving Oil Refinery; they require:
*8 Journeyman Pipefitters *3 Pipefitter Apprentices * 2 Welders to test on F3/F4;F6/F5 *2 Welders to test on F3/F4;F6/F4 * 2 Welders to test on F3/F4 Inconel * 5 Welders to test on F3/F4.
Starting Wednesday Sept. 18th Nights, at 7:30pm. Duration is unknown. Will be working 10 hours shifts, 40 hours plus; until the TA then switching to 60 hours. This work is under the GPMA Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
Any local members interested in these calls, please contact the hall Monday morning between 8 and 10 a.m.
This is Local 213's Work Information for Thursday, August 22nd.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
Any members that would like Pre-Clearance for Point Lepreau, please contact the hall.
The Labour Day Parade will take place on Monday, September 2nd. We will be meeting at the corner of Charlotte and Broad Street by 11:00am. The parade will end at Area 506 before 12:00pm. There will be a free BBQ to follow at Rockwood Park starting at 12:30pm, between the A-Frame and and the playground. They will have bouncy castles for the kids, so bring your family. Everyone is welcome to participate. Please advise the hall if your available to volunteer.
1st call is for Sunny Corner at Pt. Lepreau; they require:
* 7 Instrument Tech Journeyman
Starting as soon as CSIS is cleared at 7:30am. Duration is 6 months plus, and they are working 5x8's , 7:30am -3:30pm Monday-Friday. This work is under the NMA Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
2nd call is for Lorneville at Fab Shop Whitebone Way; they require:
* 2 Journeyman Pipefitters
Starting Monday Aug. 26th, at 7:30am Duration is 4 Weeks. Will be and they are working 7:30-4:00 Mon-Fri, with possible overtime and possible night shift . This work is under the Fab Shop Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
3rd call is for Sunny Corner at Irving Pulp & Paper West; they require:
* 1 Pipefitter Apprentice
Starting Monday Aug. 26th , at 7:30am. Duration is 4 Weeks plus, and they are working 4x10's Monday -Thursday. This work is under the Industrial Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
4th call is for Sunny Corner at IOL Refinery; they require:
Starting Monday Sept. 9th Nights, at 7:00pm. Duration is approx 4 weeks Will be working 10 hours shifts, 40 hours; until the outage then switching to 60 hours. This work is under the NMA Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
5th call is for Cam at Irving Oil Refinery; they require:
*1 Journeyman Pipefitter
Starting Wednesday Sept. 11th Nights, at 7:30pm. Duration is unknown. Will be working 10 hours shifts, 40 hours plus; until the TA then switching to 60 hours. This work is under the NMA Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
6th call is for Cam at Irving Oil Refinery; they require:
*1 F3/F4 Welder to test on F3/F4
Starting As soon as necessary requirements are completed. 7:30am. Duration is unknown. Will be working 10 hours shifts, 40 hours plus; until the TA then switching to 60 hours. This work is under the GPMA Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
7th call is for Lorneville at Irving Pulp & Paper West; they require:
* 1 Journeyman Pipefitter
Starting Monday Aug. 26th , at 7:00am. Duration is 1-2 months plus, they are working 4x10's Monday -Thursday. This work is under the Industrial Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
Any local members interested in these calls, please contact the hall Friday morning between 8 and 10 a.m.
This is Local 213's Work Information for Wednesday, August 21st.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
Any members that would like Pre-Clearance for Point Lepreau, please contact the hall.
The Labour Day Parade will take place on Monday, September 2nd. We will be meeting at the corner of Charlotte and Broad Street by 11:00am. The parade will end at Area 506 before 12:00pm. There will be a free BBQ to follow at Rockwood Park starting at 12:30pm, between the A-Frame and and the playground. They will have bouncy castles for the kids, so bring your family. Everyone is welcome to participate. Please advise the hall if your available to volunteer.
1st call is for Marque at Irving Oil Refinery; they require:
* 1 Instrument fitter, Journeyman
Starting as soon as requirements are completed at 7:00 am. Duration is approx. 1 week. They will be working 40 hours, 4x10's Mon-Thurs. This work is under the NMA agreement. Must pass the tube bending test. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
2nd call is for Sunny Corner at Pt. Lepreau; they require:
* 9 Instrument Tech Journeyman
Starting as soon as CSIS is cleared at 7:30am. Duration is 6 months plus, and they are working 5x8's , 7:30am -3:30pm Monday-Friday. This work is under the NMA Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
3rd call is for Lorneville at Fab Shop Whitebone Way; they require:
* 2 Journeyman Pipefitters and *1 Pipefitter Apprentice *1 F3/F4 Welders to test on F3/F4 Stainless Tig
Starting Monday Aug. 26th, at 7:30am Duration is 4 Weeks. Will be and they are working 7:30-4:00 Mon-Fri, with possible overtime and possible night shift . This work is under the Fab Shop Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
4th call is for Sunny Corner at Irving Pulp & Paper West; they require:
* 2 Journeyman Pipefitters * 1 Pipefitter Apprentice * 1 F3/F4 Welders to test on F3/F4 and Stainless Tig.
Starting Monday Aug. 26th , at 7:30am. Duration is 4 Weeks plus, and they are working 4x10's Monday -Thursday. This work is under the Industrial Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
5th call is for Sunny Corner at IOL Refinery; they require:
* 1 Journeyman Pipefitter
Starting Tuesday Sept. 3rd Nights, at 7:00pm. Duration is approx 5 weeks Will be working 10 hours shifts, 40 hours; until the outage then switching to 60 hours. This work is under the NMA Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
6th call is for Sunny Corner at IOL Refinery; they require:
Starting Monday Sept. 9th Nights, at 7:00pm. Duration is approx 4 weeks Will be working 10 hours shifts, 40 hours; until the outage then switching to 60 hours. This work is under the NMA Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
7th call is for Cam at Irving Oil Refinery; they require:
*1 Journeyman Pipefitter
Starting Wednesday Sept. 11th Nights, at 7:30pm. Duration is unknown. Will be working 10 hours shifts, 40 hours plus; until the TA then switching to 60 hours. This work is under the NMA Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
Any local members interested in these calls, please contact the hall Thursday morning between 8 and 10 a.m.
This is Local 213's Work Information for Tuesday, August 20th.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
Any members that would like Pre-Clearance for Point Lepreau, please contact the hall.
1st call is for Marque at Irving Oil Refinery; they require:
* 1 Instrument fitter, Journeyman
Starting as soon as requirements are completed at 7:00 am. Duration is approx. 1 week. They will be working 40 hours, 4x10's Mon-Thurs. This work is under the NMA agreement. Must pass the tube bending test. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
2nd call is for Sunny Corner at Pt. Lepreau; they require:
* 10 Instrument Tech Journeyman
Starting as soon as CSIS is cleared at 7:30am. Duration is 6 months plus, and they are working 5x8's , 7:30am -3:30pm Monday-Friday. This work is under the NMA Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
3rd call is for Lorneville at Irving Pulp & Paper West; they require:
* 1 F3/F4 Welders to test on F3/F4 and Carbon Stick and Stainless Tig
Starting As soon as requirements are completed, at 7:00am. Duration is 1 month plus, and they are working 4x10's. This work is under the Industrial Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
4th call is for Lorneville at Irving Oil Refinery; they require:
* 1 Journeyman Pipefitter and *1 F3/F4 Welders to test on F3/F4 .
Starting Monday Aug. 26th Days , at 7:00am with plan to switch to 7:30am start during TA. Duration is 1 month plus, Scope of Work is TA Pre-Work. Will be and they are working 4x10's Mon-Thurs. up until the TA then switching to 6x10's. This work is under the NMA. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
5th call is for Lorneville at Irving Oil Refinery; they require:
* 1 Journeyman Pipefitter and *1 F3/F4 Welders to test on F3/F4 .
Starting Monday Aug. 26th Nights, at 7:00am. Night shift will start on days and then switch to nights during TA. Duration is 1 month plus, Scope of Work is TA Pre-Work. Will be and they are working 4x10's Mon-Thurs. up until the TA then switching to 6x10's. This work is under the NMA Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
Any local members interested in these calls, please contact the hall Wednesday morning between 8 and 10 a.m.
This is Local 213's Work Information for Monday, August 19th.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
1st call is for Marque at Irving Oil Refinery; they require:
* 1 Instrument fitter, Journeyman
Starting as soon as requirements are completed at 7:00 am. Duration is approx. 1 week. They will be working 40 hours, 4x10's Mon-Thurs. This work is under the NMA agreement. Must pass the tube bending test. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
2nd call is for Sunny Corner at Irving Pulp & Paper West; they require:
* 1 F3/F4 Welders to test on F3/F4 and Stainless Tig
Starting As soon as requirements are completed at 7:00am. Duration is 2 weeks plus, and they are working 4x10's Monday- Thursday. This work is under the Industrial Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
3rd call is for Lorneville at Irving Pulp & Paper West; they require:
* 1 F3/F4 Welders to test on F3/F4 and Carbon Stick and Stainless Tig
Starting As soon as requirements are completed, at 7:00am. Duration is 1 month plus, and they are working 4x10's. This work is under the Industrial Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
4th call is for Lorneville at Irving Oil Refinery; they require:
* 1 Journeyman Pipefitter and *1 F3/F4 Welders to test on F3/F4 .
Starting Monday Aug. 26th Days , at 7:00am with plan to switch to 7:30am start during TA. Duration is 1 month plus, Scope of Work is TA Pre-Work. Will be and they are working 4x10's Mon-Thurs. up until the TA then switching to 6x10's. This work is under the NMA. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
5th call is for Lorneville at Irving Oil Refinery; they require:
* 1 Journeyman Pipefitter and *1 F3/F4 Welders to test on F3/F4 .
Starting Monday Aug. 26th Nights, at 7:00am. Night shift will start on days and then switch to nights during TA. Duration is 1 month plus, Scope of Work is TA Pre-Work. Will be and they are working 4x10's Mon-Thurs. up until the TA then switching to 6x10's. This work is under the NMAAgreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
Any local members interested in these calls, please contact the hall Tuesday morning between 8 and 10 a.m.
This is Local 213's Work Information for Friday, August 16th.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
1st call is for Marque at Irving Oil Refinery; they require:
* 1 Instrument fitter, Journeyman
Starting Monday, Aug. 19th, at 7:00 am. Duration is approx. 1 week. They will be working 40 hours, 4x10's Mon-Thurs. This work is under the NMA agreement. Must pass the tube bending test. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
2nd call is for CAM at Irving Oil Refinery; they require:
* Journeyman Pipefitters * 2 F3/F4 Welders to test on F3/F4
Starting Monday, Aug. 19th, at 7:30am. Duration is unknown. They will be working 4x10's - 40 hours plus with possible overtime. This work is Maintenance and Repair under the GPMA. Must be able to climb and work from heights. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
3rd call is for Sunny Corner at Irving Pulp & Paper West; they require:
*1 Journeyman Pipefitters * 1 F3/F4 Welders to test on F3/F4 and Stainless Tig
Starting Monday, Aug. 19th, at 7:00am. Duration is 2 weeks plus, and they are working 4x10's Monday- Thursday. This work is under the Industrial Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
4th call is for Lorneville at Irving Pulp & Paper West; they require:
* 1 F3/F4 Welders to test on F3/F4 and Carbon Stick and Stainless Tig
Starting Monday, Aug. 19th, at 7:00am. Duration is 1 month plus, and they are working 4x10's. This work is under the Industrial Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
Any local members interested in these calls, please contact the hall Monday morning between 8 and 10 a.m.
This is Local 213's Work Information for Thursday, August 15th.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
1st call is for Marque at Irving Oil Refinery; they require:
* 1 Instrument fitter, Journeyman
Starting Monday, Aug. 19th, at 7:00 am. Duration is approx. 1 week. They will be working 40 hours, 4x10's Mon-Thurs. This work is under the NMA agreement. Must pass the tube bending test. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
2nd call is for CAM at Irving Oil Refinery; they require:
*2 Journeyman Pipefitters * 1 Apprentice Fitter * 2 F3/F4 Welders to test on F3/F4
Starting Monday, Aug. 19th, at 7:30am. Duration is unknown. They will be working 4x10's - 40 hours plus with possible overtime. This work is Maintenance and Repair under the GPMA. Must be able to climb and work from heights. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
3rd call is for Sunny Corner at Irving Pulp & Paper West; they require:
*2 Journeyman Pipefitters * 1 F3/F4 Welders to test on F3/F4 and Stainless Tig
Starting Monday, Aug. 19th, at 7:00am. Duration is 2 weeks plus, and they are working 4x10's Monday- Thursday. This work is under the Industrial Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
4th call is for Lorneville at Irving Pulp & Paper West; they require:
* 2 F3/F4 Welders to test on F3/F4 and Carbon Stick and Stainless Tig
Starting Monday, Aug. 19th, at 7:00am. Duration is 1 month plus, and they are working 4x10's. This work is under the Industrial Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
Any local members interested in these calls, please contact the hall Friday morning between 8 and 10 a.m.
This is Local 213's Work Information for Wednesday, August 14th.
The regular monthly meeting will be held this evening Wednesday Aug. 14th at the Legion Branch 69. Located at 714 Wilson Street West.
It is with great sadness that we announce brother Timothy Hampton has passed away on August 8th. A celebration of life will be held at a later date at the KV Billiards.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
1st call is for Marque at Irving Oil Refinery; they require:
* 1 Instrument fitter, Journeyman
Starting Monday, Aug. 19th, at 7:00 am. Duration is approx. 1 week. They will be working 40 hours, 4x10's Mon-Thurs. This work is under the NMA agreement. Must pass the tube bending test. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
2nd call is for CAM at Irving Oil Refinery; they require:
*1 Journeyman Pipefitter
Starting Monday, Aug. 19th, at 7:30am. Duration is unknown. Scope of work is Maintenance. They will be working 4x10's with possible overtime. This work is under the GPMA. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
3rd call is for Lorneville at Irving Pulp & Paper West; they require:
*3 Journeyman Pipefitters, 2 Apprentice Pipefitters, 4 F3/F4 Welders to test on Carbon Stick and 316 Stainless Tig
Starting Monday, Aug. 19th, at 7:00am. Duration is 1 month plus, and they are working 4x10's. This work is under the Industrial Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
4th call is for Lorneville at Irving Pulp & Paper West, they require:
*1 Journeyman Pipefitter with tubing experience
Starting Monday, Aug. 19th, at 7:00am. Duration is 1 month plus, and they are working 4x10's. This work is under the Industrial Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
Any local members interested in these calls, please contact the hall Thursday morning between 8 and 10 a.m.
This is Local 213's Work Information for Tuesday, August 13th.
Please be advised that the Hall and surrounding area are without internet and phone lines. Bell Aliant is currently working on the issue and hopes to have it up and running again within 24-48 hours. That being said, they do not have a definitive completion time, so please check the hotline for updates.
The regular monthly meeting will be held tomorrrow Wednesday Aug. 14th at the Legion Branch 69. Located at 714 Wilson Street West.
We will be running the calls from Monday, Aug. 12th, again today. If your interested in a call and unable to reach someone at the hall, please contact Bill at (506) 271-2626.
It is with great sadness that we announce brother Timothy Hampton has passed away on August 8th. A celebration of life will be held at a later date at the KV Billiards.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
1st call is for Marque at Irving Oil Refinery; they require:
* 1 Instrument fitter, Journeyman
Starting Monday, Aug. 19th, at 7:00 am. Duration is approx. 1 week. They will be working 40 hours, 4x10's Mon-Thurs. This work is under the NMA agreement. Must pass the tube bending test. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
2nd call is for CAM at Irving Oil Refinery; they require:
*1 Journeyman Pipefitter
Starting Wednesday, Aug. 14th, at 6:00pm. Duration is unknown. Scope of work is Maintenance. They will be working 4x10's with possible overtime. This work is under the GPMA. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
3rd call is for Babcock & Wilcox at Coleson Cove; they require:
*1 F3/F4 Welder to test on F3/F4, F6/F4
Starting Thursday, Aug. 15th, at 7:30am. Duration is 2 shifts plus, and they are working 10 hour shifts. This work is under the NMA. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
Any local members interested in these calls, please contact the hall Wednesday morning between 8 and 10 a.m. If you cannot get through on that line, please try (506) 271-2626.
This is Local 213's Work Information for Monday, August 12th
It is with Great Sadness will announce brother Timothy Hampton has passed away on August 8th. We will provide further details when they become available.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
1st call is for Marque at Irving Oil Refinery, they require:
* 1 Instrument fitter Journeyman
Starting Monday Aug. 19th at 7:00 am. Duration is approx. 1 week. They will be working 40 hours, 4x10's Mon-Thurs. This work is under the NMA agreement. Must pass tube bending test. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
2nd call for Lorneville at Irving Oil Refinery (Gate 8, Turn Around Complex 2 ) they require:
* 1 Journeyman Pipefitter
Starting Monday Aug. 12th at 7:00 am Duration is 1 month plus. Scope of work is Maintenance. They will be working 4x10's. Mon - Thurs with possible overtime until mid September then will be switching to 5x10's. This work is under the Short-Term NMA. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
3rd call is for CAM at Irving Oil Refinery, they require:
*1 Journeyman Pipefitter
Starting Wednesday Aug. 14th at 6:00pm. Duration is unknown. Scope of work is Maintenance. They will be working 4x10's with possible overtime. This work is under the GPMA. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
4th call is for Babcock & Wilcox at Coleson Cove, they require:
*1 Journeyman F3/F4 Welder to test on F3/F4, F6/F4
Starting Thursday Aug. 15th at 7:30am. Duration is 2 shifts plus and they are working 10 hour shifts. This work is under the NMA. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
Any local members interested in these calls, please contact the hall Tuesday morning between 8-10am.
This is Local 213's Work Information for Friday August 9th
It is with Great Sadness will announce brother Timothy Hampton has passed away on August 8th. We will provide further details when they become available.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
1st call for Sunny Corner at IPP they require:
* 1 Pipefitter Apprentice * 1 F3/F4 Welder to test on F3/F4 and Stainless Tig
Starting Monday Aug. 12th at 7:30 am. Duration is 2 weeks plus. They will be working 4x10's Mon-Thurs . This work is under the Industrial Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
2nd call is for Marque at Irving Oil Refinery, they require:
* 2 Instrument fitter Journeyman
Starting Monday Aug. 19th at 7:00 am. Duration is approx. 1 week. They will be working 40 hours, 4x10's Mon-Thurs. This work is under the NMA agreement. Must pass tube bending test. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
3rd call for Lorneville at Irving Oil Refinery (Gate 8, Turn Around Complex 2 ) they require:
* 1 Journeyman Pipefitter
Starting Monday Aug. 12th at 7:00 am Duration is 1 month plus. Scope of work is Maintenance. They will be working 4x10's. Mon - Thurs with possible overtime until mid September then will be switching to 5x10's. This work is under the Short-Term NMA. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
Any local members interested in these calls, please contact the hall Monday morning between 8-10am.
This is Local 213's Work Information for Thursday August 8th
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
1st call is for Sunny Corner at IOL Refinery, Gate 8 - 411 Grandview Ave. they require:
* 1 F3/F4 Welder to test on F3/F4 F6/F4
Starting Monday Aug. 12th at 7:00 am. Duration is approx. 8 weeks. They will be working 40 hours - 4x10's until outage then moving to 60 hours. This work is under the NMA agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
2nd call for Sunny Corner at IPP they require:
* 1 Journeyman Pipefitter * 1 Pipefitter Apprentice * 1 F3/F4 Welder to test on F3/F4 and Stainless Tig
Starting Monday Aug. 12th at 7:30 am. Duration is 2 weeks plus. They will be working 4x10's Mon-Thurs . This work is under the Industrial Agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
3rd call is for Marque at Irving OIl Refinery, they require:
* 2 Instrument Fitter Journeyman
Starting Monday Aug. 19th at 7:00 am. Duration is approx. 1 week. They will be working 40 hours, 4x10's Mon-Thurs. This work is under the NMA agreement. Must pass tube bending test. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
4th call for Lorneville at Irving Oil Refinery (Gate 8, Turn Around Complex 2 ) they require:
* 1 Journeyman Pipefitters *1 F3/F4 Welders to test on F3/F4
Starting Monday Aug. 12th at 7:00 am Duration is 1 month plus. Scope of work is Maintenance. They will be working 4x10's. Mon - Thurs with possible overtime until mid september then will be switching to 5x10's. This work is under the Short-Term NMA. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
Any local members interested in these calls, please contact the hall Friday morning between 8-10am.
This is Local 213's Work Information for Wednesday August 7th
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
1 call for Sunny Corner at IOL Refinery, Gate 8 - 411 Grandview Ave. they require:
* 1 F3/F4 Welder to test on F3/F4 F6/F4
Starting Monday Aug. 12th at 7:00 am. Duration is approx. 8 weeks. They will be working 40 hours - 4x10's until outage then moving to 60 hours. This work is under the NMA agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
Any local members interested in this call, please contact the hall Thursday morning between 8-10am.
This is Local 213's Work Information for Tuesday, August 6th
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
1st call for Lorneville at the Fab Shop they require:
* 1 Journeyman Pipefitter * 1 F3/F4 Welder to test on F3/F4 Carbon Stick and Stainless Tig.
Starting ASAP at 7:30 am. Duration is 4 weeks. They will be working 5x8's , 7:30-4:00 with possible overtime. This work is under the Fab Shop agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
Any local members interested in this call, please contact the hall Wednesday morning between 8-10am.
This is Local 213's Work Information for Friday, August 2nd
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
1st call for B&W at Colsen Cove they require:
* 1 Pipefitter Apprentice
Starting Monday Aug. 6th at 7:30 am Duration is 2 weeks plus. They will be working 4x10's. This work is under the NMA agreement. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
2nd call for Sunny Corner in Havelock they require:
* 1 Pipefitter Apprentice
Starting Wednesday Aug. 7th at 7:30 am Duration 1 day, will be working 8 hours. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site.
Any local members interested in this call, please contact the hall Tuesday morning between 8-10am.
This is Local 213's Work Information for Thursday, August 1st
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
1st call for Lorneville at Irving Oil Refinery (Gate 8, Turn Around Complex 2 ) they require:
* 1 Journeyman Pipefitter *1 F3/F4 Welder to test on F3/F4 for NIGHTS
Starting Monday Aug. 12th at 7:00 am with plan to switch to 7:30 am start during Turn Around. Night shift will start on days and switch to nights mid Sept. Duration is 2 months. Scope of work is turn around pre-work. They will be working 4x10's. Mon - Thurs during pre-work up until mid September, then switching to 6x10's on turn around. This work is under the Short Term NMA. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
2nd call for Lorneville at Irving Oil Refinery (Gate 8, Turn Around Complex 2 ) they require:
* 6 Journeyman Pipefitters *3 F3/F4 Welders to test on F3/F4 and *1 Pipefitter Apprentice
Starting Monday Aug. 12th at 7:00 am Duration is 1 month plus. Scope of work is Maintenance. They will be working 4x10's. Mon - Thurs with possible overtime. This work is under the Short-Term NMA. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
3rd call for Lorneville at Irving Oil Refinery (Gate 8, Turn Around Complex 2 ) they require:
*1 Pipefitter Apprentice for DAYS
* 2 Journeyman Pipefitters for NIGHTS
Starting Monday Aug. 19th at 7:00 am with plan to switch to 7:30 am start during Turn Around. Night shift will start on days and switch to nights mid Sept. Duration is 2 months. Scope of work is turn around pre-work. They will be working 4x10's. Mon - Thurs during pre-work up until mid September, then switching to 6x10's on turn around. This work is under the Short Term NMA. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
Any local members interested in these calls, please contact the hall Friday morning between 8-10am.
This is Local 213's Work Information for Wednesday, July 31st.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
1st call for Lorneville at Irving Oil Refinery (Gate 8, Turn Around Complex 2 ) they require:
* 1 Journeyman Pipefitter *1 F3/F4 Welder to test on F3/F4 for DAYS
* 1 Journeyman Pipefitter *1 F3/F4 Welder to test on F3/F4 for NIGHTS
Starting Monday Aug. 12th at 7:00 am with plan to switch to 7:30 am start during Turn Around. Night shift will start on days and switch to nights mid Sept. Duration is 2 months. Scope of work is turn around pre-work. They will be working 4x10's. Mon - Thurs during pre-work up until mid September, then switching to 6x10's on turn around. This work is under the Short Term NMA. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
2nd call for Lorneville at Irving Oil Refinery (Gate 8, Turn Around Complex 2 ) they require:
* 6 Journeyman Pipefitters *3 F3/F4 Welders to test on F3/F4 and *2 Pipefitter Apprentices
Starting Monday Aug. 12th at 7:00 am Duration is 1 month plus. Scope of work is Maintenance. They will be working 4x10's. Mon - Thurs with possible overtime. This work is under the Short-Term NMA. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
3rd call for Lorneville at Irving Oil Refinery (Gate 8, Turn Around Complex 2 ) they require:
* 1 Journeyman Pipefitters *1 Pipefitter Apprentice for DAYS
* 2 Journeyman Pipefitters for NIGHTS
Starting Monday Aug. 19th at 7:00 am with plan to switch to 7:30 am start during Turn Around. Night shift will start on days and switch to nights mid Sept. Duration is 2 months. Scope of work is turn around pre-work. They will be working 4x10's. Mon - Thurs during pre-work up until mid September, then switching to 6x10's on turn around. This work is under the Short Term NMA. Must be clean shaven and fit tested. Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.
Any local members interested in these calls, please contact the hall Thursday morning between 8-10am.
This is Local 213's Work Information for Tuesday, July 30th.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
Any members that require updated safety courses before the shut-down, please contact the hall to register. We will be holding Fall Protection course at the hall on Friday, August 9th, starting at 12:30pm; and Confined Space will be held on Aug. 10th and 11th starting at 8:00am.
This is Local 213's Work Information for Monday, July 29th.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
Any members that require updated safety courses before the shut-down, please contact the hall to register. We will be holding Fall Protection course at the hall on Friday, August 9th, starting at 12:30pm; and Confined Space will be held on Aug. 10th and 11th starting at 8:00am.
This is Local 213's Work Information for Friday, July 26th.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be CWB testing at the hall on July 30th, please contact the hall to register.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
Any members that require updated safety courses before the shut-down, please contact the hall to register. We will be holding Fall Protection course at the hall on Friday, August 9th, starting at 12:30pm; and Confined Space will be held on Aug. 10th and 11th starting at 8:00am.
Local 213's annual summer picnic will be held tomorrow Saturday, July 27th, from 12:00 - 4:00 p.m. at the Glen Carpenter Center, 730 Foster Thurston Drive. We are still looking for volunteers; if you are available to lend a hand, please advise the hall.
This is Local 213's Work Information for Thursday, July 25th.
The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.
There will be CWB testing at the hall on July 30th, please contact the hall to register.
There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.
Any members that require updated safety courses before the shut-down, please contact the hall to register. We will be holding Fall Protection course at the hall on Friday, August 9th, starting at 12:30pm; and Confined Space will be held on Aug. 10th and 11th starting at 8:00am.
Local 213's annual summer picnic will be held this Saturday, July 27th, from 12:00 - 4:00 p.m. at the Glen Carpenter Center, 730 Foster Thurston Drive. We are still looking for volunteers; if you are available to lend a hand, please advise the hall.
There are no calls at the hall today.
Thank You, & Have a Great Evening!
July 25 2024, 4:13 PM
Category:Dispatch
Posted by: Michelle
Upcoming Meeting Notice
Click the image above to read the
letter for more information.
Updated Collective Agreement
The updated Industrial Collective agreement is now available in the members only section of this website.
.png)
.png)
.png)
.png){kind=small}
.png){kind=small}
.png){kind=small}
.png){kind=small}
.png){kind=small}
.png){kind=small}
Copyright UA Local 213 Saint John, 2020