This is Local 213’s Work Information for Thursday February 14th.
There will be a Fall Protection course on February 22nd and a Confined Space course February 23rd and 24th. Please contact the hall to register.
Tax slips are available for pick up at the hall.
There is 1 call for Jacobs at the Refinery. They require 2 Pipefitters & 2 F3/F4 Welders to test on F3/F4 starting Tuesday, February 19th at 7:30am for Days. Duration is unknown and they are working 4x10's with possible overtime. You must have all safety training up to date, be able to climb, work at heights, be clean shaven and a D&A is required. This work is under Long Term Maintenance and Repair.
Any local members interested in this call, can contact the hall Friday morning between 8:00-10:00am.
This is Local 213’s Work Information for Wednesday February 13th, 2019
The hall and weld shop will be closed today due to the storm.
There is 1 call for Marque at the refinery.They require 1 Apprentice Pipefitter for days and 1 Apprentice Pipefitter for nights. starting February 19th 7:30am for orientation and shift will start February 20th 7:30 am for days and 5:30 pm for nights. Duration approx. 3 months and they are working 6x10’s.You must have all safety training up to date, be able to climb and work at heights, must pass a tube bending test and a D&A test is required.
Any local members interested in this call can contact the hall Thursday morning between 8 and 10am.
There will be a Fall Protection Course February 22nd and a Confined Space Course February 23rd & 24th.Please call the hall to register.
Tax slips are available for pick up at the hall.Anyone looking for their tax slips from local 401 they are at the hall for pickup.
This is Local 213’s Work Information for Tuesday February 12th, 2019
There is 1 call for Marque at the refinery.They require 1 Journeyman Instrument Fitter for nights starting February 19th 7:30am for orientation and shift will start February 20th 5:30pm.Duration is approximately 3 months and they are working 6x10’s.You must have all safety training up to date, be able to climb and work at heights, must pass a tube bending test and a D&A test is required.
Any local members interested in this call can contact the hall Wednesday morning between 8 and 10am.
There will be a Fall Protection Course February 22nd and a Confined Space Course February 23rd & 24th.Please call the hall to register.
Tax slips are available for pick up at the hall.Anyone looking for their tax slips from local 401 they are at the hall for pickup.
This is Local 213’s Work Information for Thursday February 7, 2019
There is 1 call for Lorneville at the Refinery.They require 2 Pipefitters, 1 Apprentice Pipefitter and 1 Apprentice Welder to start Monday February 11th 7:30am.They also require 1 F3/F4 Welder to test on Carbon Steel with a start date of February 13th if IOR orientation is required, otherwise start date will be Tuesday February 12th 7:30am.Duration is unknown and they are working 4 x 10’s with possible overtime.Work is under the NMA long term.You must have all safety training up to date, must be able to climb, work at heights, be medically fit to wear a full face respirator, be clean shaven and a D&A is required.
Any local members interested in this call can contact the hall Friday morning between 8 and 10am.
There will be a Fall Protection Course February 22nd and a Confined Space Course February 23rd & 24th.Please call the hall to register.
Tax slips are available for pick up at the hall.Anyone looking for their tax slips from local 401 they are at the hall for pickup.
There will be a Shop Steward course in Moncton on Feb 22nd & 23rd at 8:00am. Please call the hall to register.
This is Local 213’s Work Information for Tuesday February 5th, 2019
The 1st call is for Lorneville at the Refinery. They require 1 Apprentice Pipefitter for days starting Friday February 8th 7:30am.Duration is unknown and they are working 4 x 10’s with possible overtime.Work is under the NMA long term.You must have all safety training up to date, must be able to climb, work at heights, be medically fit to wear a half face respirator, be clean shaven and a D&A is required.
The 2nd call is for Lorneville at the Refinery.They require 2 Journeyman Pipefitters and 1 Apprentice Pipefitter for nights starting Friday February 8th 7:30am if IOR orientation is required shift would begin Monday night 5:30pm.If no IOR orientation is required, then shift will start Thursday night February 7th at 5:30pm.Duration is unknown and they are working 4 x 10’s with possible overtime.Work is under the NMA long term.You must have all safety training up to date, must be able to climb, work at heights, be medically fit to wear a half face respirator, be clean shaven and a D&A is required.
Any local members interested in these calls can contact the hall Wednesday morning between 8 and 10am.
Tax slips are available for pick up at the hall.
There will be a Shop Steward course in Moncton on Feb 22nd & 23rd at 8:00am. Please call the hall to register.
This is Local 213’s Work Information for Monday, February 4, 2019.
The 1st call is for Lorneville at the Refinery. They require 1 F3/F4 welder to test on F3/F4 starting Wednesday, February 6th for Weld Test. You must have all safety training up to date, be able to climb & work at heights, be medically fit to wear a half face respirator and a D& A is required.
The 2nd call is for Sunny corner at Point Lepreau. They require 2 F3/F4 Welders to test on Tig/Stick CS 2” Sch.80 coupon, Tig/Stick CS-SS 2” Sch. 80 coupon & automatic tube welding. Starting March 18th for GET training. Duration is approx. 6 Weeks. Portions of this job are in the RB in plastic suits.
The 3rd call is for Sunny Corner at Point Lepreau. starting April 1st. They require 1 F3/F4 Welder to test on Tig CS 2” sch 80 coupon. This work is in the RB in plastic suits. Duration is approx. 3 weeks.
The 4th call is for Sunny Corner at Point Lepreau. They require 2F3/F4 Welders for Nights starting March 11th 7:30am for GET Training if needed. Work is in the reactor building with plastic suits and in a very tight area. Field joints are 100% RT. Welders will be tested on Tig Stick Carbon Steel - 2" diameter, sch.80 coupons, Tig Carbon Steel - multiple 3/4" diameter, sch.80 coupons, and Tig Carbon Steel 2" sch.160 coupons. The weld test date is to be determined. Duration is approximately 6-8 weeks and the shift schedule will be 6-12hr shifts during the outage, except for leading up to the outage and demo the shifts will be 8 hours per day. They will all start on day shift and then switch to night shift once the outage starts. Hours of work during the outage will be per NBPN's hours of work policy. Mandatory days off will not be paid. There may be a requirement to reduce the shift to 8 hrs during the outage if there is down time. You must have CSA approved non-metallic (composite) work boots. Standard of Excellence training is required prior to dispatch. There can be no vacation time allowed to be taken during this call out for work. You must have all safety training up to date. You must be able to work at heights, lots of climbing, labor intensive, high heat areas, rigging intensive, and strenuous work.
The 5th call is for Lorneville at Point Lepreau. They require 1 F3/F4 welder to test on (1) CS Sch 80 F4, (1) SS Sch. 80 309 Stick, (1) CS XXS 309 Tig Root 7018 Fill & Cap, (1) SS XXS 309 Tig Root 309 Stick Fill and Cap, (4) CS 3/8 Tig all the way and (4) SS 3/8 Tig all the way starting March 4th. Hire on activities will be on straight time hours. When Plant Shutdown conditions are in effect work will be completed on extended hours up to and including 12-hour shifts, for 6 days each week. All workers will be required to work days or night shift as required by owners’ conditions and discretion. You must have all safety training up to date, be able to climb and work at heights. Must have CSA approved non-metallic (composite) work boots.
Any local members interested in these calls can contact the hall Tuesday morning between 8:00 and 10:00am.
Tax slips are available for pick up at the hall.
There will be a Shop Steward course in Moncton on Feb 22nd & 23rd at 8:00am. Please call the hall to register.
This is Local 213’s Work Information for Friday, February 1, 2019.
The 1st call is for Sunny Corner at Point Lepreau. They require 1F3/F4 Welder to test on Tig/Stick CS 2” sch.80 coupon. CSIS clearance is required however there is a chance this worker may be required for the outage. Work will start between Feb - 11-15 Duration is approx. 3 weeks.
The 2nd call is for Sunny corner at Point. They require 1 Pipefitter & 2F3/F4 Welders to test on Tig/Stick CS 2” Sch.80 coupon, Tig/Stick CS-SS 2” Sch. 80 coupon & automatic tube welding. Starting March 18th for GET training. Duration is approx. 6 Weeks. Portions of this job are in the RB in plastic suits and Fitters will need to attend Swaglock Training.
The 3rd call is for Sunny Corner at Point Lepreau. They require 1 Pipefitters for days & 1 Pipefitter for nights starting March 25th for GET training. Duration is approx. 6 weeks.
The 4th call is for Sunny Corner at Point lepreau. They require 1 Pipefitter & 1F3/F4 Welder to test on Tig CS 2” sch 80 coupon. This work is in the RB in plastic suits. Duration is approx. 3 weeks.
The 5th call is for Sunny Corner at Point Lepreau. They require 3F3/F4 Welders for Nights starting March 11th 7:30am for GET Training if needed. Work is in the reactor building with plastic suits and in a very tight area. Field joints are 100% RT. Welders will be tested on Tig Stick Carbon Steel - 2" diameter, sch.80 coupons, Tig Carbon Steel - multiple 3/4" diameter, sch.80 coupons, and Tig Carbon Steel 2" sch.160 coupons. The weld test date is to be determined. Duration is approximately 6-8 weeks and the shift schedule will be 6-12hr shifts during the outage, except for leading up to the outage and demo the shifts will be 8 hours per day. They will all start on day shift and then switch to night shift once the outage starts. Hours of work during the outage will be per NBPN's hours of work policy. Mandatory days off will not be paid. There may be a requirement to reduce the shift to 8 hrs during the outage if there is down time. You must have CSA approved non-metallic (composite) work boots. Standard of Excellence training is required prior to dispatch. There can be no vacation time allowed to be taken during this call out for work. You must have all safety training up to date. You must be able to work at heights, lots of climbing, labor intensive, high heat areas, rigging intensive, and strenuous work.
The 6th call is for Lorneville at Point Lepreau. They require 1 F3/F4 welder to test on (1) CS Sch 80 F4, (1) SS Sch. 80 309 Stick, (1) CS XXS 309 tig Root 7018 Fill & Cap, (1) SS XXS 309 Tig Root 309 Stick Fill and Cap, (4) CS 3/8 Tig all the way and (4) SS 3/8 Tig all the way starting March 4th. Hire on activities will be on straight time hours. When Plant Shutdown conditions are in effect work will be completed on extended hours up to and including 12-hour shifts, for 6 days each week. All workers will be required to work days or night shift as required by owners’ conditions and discretion. You must have all safety training up to date, be able to climb and work at heights. Must have CSA approved non-metallic (composite) work boots.
Any local members interested in these calls can contact the hall Monday morning between 8:00 and 10:00am.
Tax slips are available for pick up at the hall.
There will be a Shop Steward course in Moncton on Feb 22nd & 23rd at 8:00am. Please call the hall to register.
This is Local 213’s Work Information for Thursday, January 31st.
The 1st call is for Sunny Corner at Point Lepreau. They require 3F3/F4 Welders for Nights starting March 11th 7:30am for GET Training if needed. Work is in the reactor building with plastic suits and in a very tight area. Field joints are 100% RT. Welders will be tested on Tig Stick Carbon Steel - 2" diameter, sch.80 coupons, Tig Carbon Steel - multiple 3/4" diameter, sch.80 coupons, and Tig Carbon Steel 2" sch.160 coupons. The weld test date is to be determined. Duration is approximately 6-8 weeks and the shift schedule will be 6-12hr shifts during the outage, except for leading up to the outage and demo the shifts will be 8 hours per day. They will all start on day shift and then switch to night shift once the outage starts. Hours of work during the outage will be per NBPN's hours of work policy. Mandatory days off will not be paid. There may be a requirement to reduce the shift to 8 hrs during the outage if there is down time. You must have CSA approved non metallic (composite) work boots. Standard of Excellence training is required prior to dispatch. There can be no vacation time allowed to be taken during this call out for work. You must have all safety training up to date. You must be able to work at heights, lots of climbing, labor intensive, high heat areas, rigging intensive, and strenuous work.
The second call is for Lorneville at Point Lepreau. They require 2 F3/F4 welders to test on (1) CS Sch 80 F4, (1) SS Sch. 80 309 Stick, (1) CS XXS 309 tig Root 7018 Fill & Cap, (1) SS XXS 309 Tig Root 309 Stick Fill and Cap, (4) CS 3/8 Tig all the way and (4) SS 3/8 Tig all the way starting March 4th. Hire on activities will be on straight time hours. When Plant Shutdown conditions are in effect work will be completed on extended hours up to and including 12 hour shifts, for 6 days each week. All workers will be required to work days or night shift as required by owners conditions and discretion. You must have all safety training up to date, be able to climb and work at heights. Must have CSA approved non metallic (composite) work boots.
Any local members interested in these calls can contact the hall Friday morning between 8:00 and 10:00am.
Tax slips are available for pick up at the hall.
There will be a Shop Steward course in Moncton on Feb 22nd & 23rd at 8:00am. Please call the hall to register.
This is Local 213’s Work Information for Wednesday, January 30th.
The 1st call is for Sunny Corner at Point Lepreau. They require 3 F3/F4 Welders for Nights starting March 11th 7:30am for GET Training if needed. Work is in the reactor building with plastic suits and in a very tight area. Field joints are 100% RT. Welders will be tested on Tig Stick Carbon Steel - 2" diameter, sch.80 coupons, Tig Carbon Steel - multiple 3/4" diameter, sch.80 coupons, and Tig Carbon Steel 2" sch.160 coupons. The weld test date is to be determined. Duration is approximately 6-8 weeks and the shift schedule will be 6-12hr shifts during the outage, except for leading up to the outage and demo the shifts will be 8 hours per day. They will all start on day shift and then switch to night shift once the outage starts. Hours of work during the outage will be per NBPN's hours of work policy. Mandatory days off will not be paid. There may be a requirement to reduce the shift to 8 hrs during the outage if there is down time. You must have CSA approved non metallic (composite) work boots. Standard of Excellence training is required prior to dispatch. There can be no vacation time allowed to be taken during this call out for work. You must have all safety training up to date. You must be able to work at heights, lots of climbing, labor intensive, high heat areas, rigging intensive, and strenous work.
Any local members interested in these calls can contact the hall Thursday morning between 8:00 and 10:00am.
Tax slips are available for pick up at the hall.
There will be a Shop Steward course in Moncton on Feb 22nd & 23rd at 8:00am.Please call the hall to register.
This is local 213’s Work Information for Monday, January 28th.
There will be a Shop Steward coursse in Moncton on Feb.22nd & 23rd at 8:00am. Please call the hall to register.
There is 1 call for Lorneville at the Refinery, they require 1 Pipefitter & 1 Apprentice Pipefitter starting Wednesday, January 30th 7:30am for orientation. You must have all safety training up to date, be able to climb, work at heights, be medically fit to wear a half face respirator, be clean shaven and a D&A is required. Duration is unknown, and they are working 4x10’s with possible overtime. Work is under the NMA.
Any local members interested in this call can contact the hall Tuesday morning between 8:00-10:00am.
This is local 213’s Work Information for Friday, January 25th.
There is 1 call for Lorneville at the Refinery, they require 1 Pipefitter & 1 F3/F4 Welder to test on F3/F4 starting Wednesday, January 30th 7:30am for orientation. You must have all safety training up to date, be able to climb, work at heights, be medically fit to wear a half face respirator, be clean shaven and a D&A is required. Weld test will be on Tuesday, January 29th at the hall. Shift will start on Monday February 4th at 7:30am. Duration is unknown, and they are working 4x10’s with possible overtime. Work is under the NMA.
Any local members interested in this call can contact the hall Monday morning between 8:00-10:00am.
This is local 213’s Work Information for Thursday, January 24th.
There will be aFall Protection Course on January 26th at 8:30am Please call the hall to register.
There is 1 call for Lorneville at the Refinery, they require 1 Apprentice Welder for Days and 1 Apprentice Welder for Nights starting Wednesday, January 30th 7:30am for orientation. Night Shift will start on Thursday January 31st 5:30pm. You must have all safety training up to date, be able to climb, work at heights, be medically fit to wear a half face respirator, be clean shaven and a D&A is required.
Any local members interested in this call can contact the hall Friday morning between 8:00-10:00am.
This is local 213’s Work Information for Wednesday, January 16th.
There will be an Information Meeting on Tuesday, January 22nd 7:00pm at the Legion Branch 69 on Wilson Street West.
There will be a Confined Space course on January 18th & 19th & a Fall Protection Course on January 26th at 8:30am Please call the hall to register.
There is 1 call is for Lorneville at the Refinery. They require 1 F3/F4 welder to test on F3/F4 starting Monday January 21st at 7:30am for weld test. You must have all safety training up to date, be able to climb, work at heights, be medically fit to wear a half face respirator, must be clean shaven and a D&A is required. Duration is unknown and they are working 4x10’s with possible overtime. Work is under the NMA Long Term and there is no LOA. This call is for Day Shift.
Any Local members interested in this call can contact the hall Thursday morning between 8:00-10:00am
This is local 213’s Work Information for Tuesday, January 15th.
There will be an Information Meeting on Tuesday, January 22nd 7:00pm at the Legion Branch 69 on Wilson Street West.
There will be a Confined Space course on January 18th & 19th & a Fall Protection Course on January 26th at 8:30am Please call the hall to register.
There is 1 call is for Lorneville at the Refinery. They require 3 Pipefitters, 2 Apprentice Pipefitters & 1F3/F4 welder to test on F3/F4 for Day Shift starting Monday January 21st at 7:30am. They also require 2 Pipefitters, 1 Apprentice Pipefitter & 3 F3/F4 welders to test on F3/F4 starting Monday January 21st 5:30pm for Nights. You must have all safety training up to date, be able to climb, work at heights, be medically fit to wear a half face respirator, must be clean shaven and a D&A is required.
Duration is unknown and they are working 4x10’s with possible overtime. Work is under the NMA Long Term and there is no LOA.
Any Local members interested in this call can contact the hall Wednesday morning between 8:00-10:00am
This is local 213’s Work Information for Friday, January 11th.
There will be an Information Meeting on Tuesday, January 22nd 7:00pm at the Legion Branch 69 on Wilson Street West.
There will be a Confined Space course on Friday & Saturday January 18th & 19th at 8:30am and a Fall Protection Course on January 26th at 8:30am. Please call the hall to register.
This is local 213’s Work Information for Thursday, January 10th.
There will be a Confined Space course on Friday & Saturday January 18th & 19th at 8:30am Please call the hall to register.
There are no calls at the hall today.
Thank you & Have A Great Evening!
January 10 2019, 3:41 PM
Category:Dispatch
Posted by: Vicki
Our Out-of-Work list is Online!
Please contact our Webmaster, Michael Stephen, with your UA Card Number to register for Member services to access our List as well as contracts. He can be reached at:
The proposals are now available online. To access them, Login and click the "Member Access Portal" button. From there, click on "Current Proposals" and a PDF containing what we will be voting on will open.
This proposal and details of how/when to vote will be mailed out to the home address of every member of UA Local 213.
.jpg)
Copyright UA Local 213 Saint John, 2019